Ready for the NEC

I spent a few hours on the estate this evening,  set the tickover to 800 rpm so it doesn't lurch into gear - as the engine has run in, the tickover had increased when hot to about 1300 rpm, due to less friction.

I still have a slight "hunting" at hot tickover which needs attention - maybe a little rich or the points need attention.

I also fitted the remaining window trim which has been absent for a very long time.

But I cannot locate the trim from the C pillar upright - does anyone have a spare one ? I have tried most of the usual suspects.

All it needs is a clean, some petrol, and its off to the NEC on Thursday. Hope to see you all there.